Spotlight Mounting Pt.2
To install the steady stays:
Step 8a. Measure the distance where the front of the rally style adjustable top stays will be located on the spotlights
Step 8b. Transpose this measurement to the axillary spot light on the other side cowl
Step 9. Using a square, locate the position for the rear of the rally style adjustable top stays fixings on the wing
Step 9b. Transpose this measurement to the wing on the other side cowl
Step 10a. Measure up from the bottom of the wing on both sides to get the final height correct
Step 10b. Transpose this measurement to the other side of the cowl on to the wing
Step 11a. Mark all hole positions on both sides
Step 11b. With the holes marked, drill using a pilot drill first; then a full-size drill for all holes
Step 10a. Measure up from the bottom of the wing on both sides to get the final height correct Step 11a. Mark all hole positions Step 11b. with the holes marked, using a pilot drill first, then a full size drill for all holes Step 12. Fasten the stays into position
Step 12. Fasten both the stays into position.